CONTROL ADD LABEL statement

Purpose

Add a text label to a dialog. A text label is similar to a conventional static control.

Syntax

CONTROL ADD LABEL, hDlg, id&, txt$, x, y, xx, yy [, [style&] [, [exstyle&]]] [[,] CALL callback]

hDlg

Handle of the dialog in which the label will be created. The dialog will become the parent of the control.

id&

Unique identifier for the control in the range 1 to 65535, frequently specified with numeric equates for clarity of the code. For example, the equate %BlockTitle is more informative than a literal value such as 497. If you will not be changing the text in a line control after it is created, you may use -1 for the id&; however, best practice suggests identifiers should start at 100 to avoid conflict with any of the standard predefined identifiers.

txt$

Text to be displayed in text label. An ampersand (&) may be included in txt$ to specify a hot-key. See the Remarks section below.

x, y

Integer expressions, variables, or numeric literal values, specifying the location of the control inside the dialog client area. x is the horizontal position, and y is the vertical position. 0,0 refers to the upper left corner of the dialog box client area. Coordinates are specified in the same terms (pixels or dialog units) as the parent dialog.

Integer expression, variable, or numeric literal value, specifying the width of the control. The width is given in the same terms (pixels or dialog units) as the parent dialog. The most common value used in the Microsoft Dialog Editor and Visual Studio is 40 dialog units.

Integer expression, variable, or numeric literal value, specifying the height of the control. The height is given in the same terms (pixels or dialog units) as the parent dialog. The most common value used in the Microsoft Dialog Editor and Visual Studio is 8 dialog units.

style&

Primary style of the label control. The default label style is %SS_LEFT. The default style is used if both the primary and extended style parameters are omitted from the statement. For example:

CONTROL ADD LABEL, hDlg, id&, txt$, 100, 100, 150, 200, , , _

CALL LabelCallback() ' Use default styles

Custom style values replace the default values. That is, they are not additional to the default style values - your code must specify all necessary primary and extended style parameters.

The primary label style value can be a combination of any values below, combined together with the OR operator to form a bitmask:

%SS_CENTER	Horizontally center the caption text. The text is formatted before it is displayed. Words that extend past the end of a line are automatically wrapped to the beginning of the next centered line.
%SS_CENTERIMAGE	Vertically center the caption text. The text is not wrapped even if it extends beyond the width of the control.
%SS_ENDELLIPSIS	Replace the end of the given string with ellipsis as needed to fit the result in the specified rectangle. Windows NT/2000/XP only.
%SS_ETCHEDFRAME	Draw the frame of the control using an etched edge style.
%SS_ETCHEDHORZ	Draw the horizontal edges of the control using an etched edge style.
%SS_ETCHEDVERT	Draw the vertical edges of the control using an etched edge style.
%SS_LEFT	Left-align the given text. The text is formatted before it is displayed. Words that extend past the end of a line are automatically wrapped to the beginning of the next left-aligned line. (default)
%SS_NOPREFIX	Prevent interpretation of ampersand (&) characters in the label text as control accelerator prefix characters. These are normally displayed with the ampersand removed and the next character in the string underscored.
%SS_NOTIFY	Send %STN_CLICKED and %STN_DBLCLK notification messages to the Callback Function when the user clicks or double-clicks the control.
%SS_NOWORDWRAP	Left-align the given text. Tabs are expanded but words are not wrapped. Text that extends past the end of a line is clipped.
%SS_PATHELLIPSIS	Replace the file path portion of the given string with ellipsis as needed to fit the result in the specified rectangle. Windows 2000/XP only.
%SS_RIGHT	Right-align the given text. The text is formatted before it is displayed. Words that extend past the end of a line are automatically wrapped to the beginning of the next right-aligned line.
%SS_SIMPLE	The caption text is left-aligned. If the control is colored, color is only applied to the region containing the caption text, and the remainder of the control is drawn in standard colors.
%SS_SUNKEN	Draw a half-sunken border around the label control.
%SS_WORDELLIPSIS	Truncate text that does not fit, adding ellipsis as needed. Windows NT/2000/XP only
%WS_GROUP	Define the start of a group of controls. The first control in each group should also use %WS_TABSTOP style. The next %WS_GROUP control in the tab order defines the end of this group and the start of a new group.

exstyle&

Extended style of the label control. The default extended label style comprises %WS_EX_LEFT. The default extended style is used if both the primary and extended parameters are omitted from the CONTROL ADD LABEL statement, in the same manner as style& above.

The extended label style value can be a combination of any values below, combined together with the OR operator to form a bitmask:

%WS_EX_CLIENTEDGE	Apply a sunken edge border to the control.
%WS_EX_LEFT	The control has generic "left-aligned" properties. (default)
%WS_EX_RIGHT	The control has generic "right-aligned" properties. This style has an effect only if the shell language is Hebrew, Arabic, or another language that supports reading order alignment; otherwise, the style is ignored.
%WS_EX_STATICEDGE	Apply a three-dimensional border style to the control (intended to be used for items that do not accept user input).
%WS_EX_TRANSPARENT	Controls/windows beneath the control are drawn before the control is drawn. The control is deemed transparent because elements behind the control have already been painted - the control itself is not drawn differently. True transparency is achieved by using Regions - see MSDN for more information.
%WS_EX_WINDOWEDGE	Apply a raised edge border to the control.

callback

Optional name of a Callback Function to handle all %WM_COMMAND messages for the label. If a callback for the control is not designated, you must create a Callback Function for the dialog to process notification messages from your label.

If the Callback Function processes a message, it should return TRUE (non-zero) to prevent the message being passed unnecessarily to the dialog callback (if one exists). The dialog callback should also return TRUE if the notification message is processed by that Callback Function. Otherwise, the DDT engine processes unhandled messages.

Remarks

If the ampersand (&) character appears in the txt$ parameter, the letter that follows will be displayed underscored. This adds a control accelerator (hot-key) to enable the user to directly "click" the control that immediately follows in the Tab-Order after the Label control, simply by pressing and holding the ALT key while pressing the specified hot-key. For example, "Choose &Security Level" makes ALT+S the hot-key.

A label control will only send messages to a callback if the %SS_NOTIFY style is used. The following notifications are sent to the Callback Function:

%BN_CLICKED	Sent when the user clicks a mouse button, or activates the button with the hot-key (unless the button has been disabled).
%STN_DBLCLK	Sent when the user double-clicks on a label control (unless the control has been disabled).
%BN_DISABLE	Sent when a button is disabled.
%STN_ENABLE	Sent when a label control has been enabled.

Use the CONTROL SET TEXT statement to change the text in a label control. This is only possible if the label has a unique ID value (i.e., id& should not be -1).

When a Callback Function receives a %WM_COMMAND message, it should explicitly test the value of CBCTL and CBCTLMSG to guarantee it is responding appropriately to the notification message.