**************
* 0.0 Color *
**************
0 1 2 3 4 5 8
12345678901234567890123456789012345678901234567890....34567890
1 OPTION - 1 ---- COLOR ----------------------------....----Rep
2 ===>
3
4 *Palette number assign (0 to 15) ****************....********
5 Part of screen palette no. sample
6 FG / BG (curr.,default)
7 Title-Line __ / __ (15/ 1, 15/ 1 ) ------- MENU -------
8 Panel-Frame __ / __ ( 7/ 0, 7/ 0 ) ===>command line etc
9 Browse-Lineno __ / __ ( 2/ 0, 2/ 0 ) 0001000| Browse scr
10 Browse-File __ / __ ( 7/ 0, 7/ 0 )
11 Edit-Lineno __ / __ ( 2/ 0, 2/ 0 ) 0001000| Edit scr
12 Edit-File __ / __ (14/ 0, 14/ 0 )
13 DirList-Linecmd __ / __ (14/ 0, 14/ 0 ) 003|||. DIRLIST EXE
14 DirList-Lineno __ / __ ( 2/ 0, 2/ 0 )
15 DirList-File __ / __ ( 7/ 0, 7/ 0 )
16 CmdOut-Lineno __ / __ ( 2/ 0, 2/ 0 ) 19:55 ===>> dir
17 CmdOut-Result __ / __ (15/ 8, 15/ 8 ) Volume in drive G h
18
19 *Palette color (0 to 3 for R G B each). MAXCOLOR=16. *********
20 Palette --> 0 1 2 3 4 5 6 7 8.... 14 15
21 color -->
22 RGB value-->000 ___ ___ ___ ___ ___ ___ ___ ___....___ __
23 current -->000 002 020 022 200 202 210 222 111....220 333
24 standard -->000 002 020 022 200 202 210 222 111....331 333
#ifdef AIX
AIX version is mono-color,colors is not set.
#endif
row 1 :Header,message display line
row 2 :Command input line
row 4-17 :Palette number assign part
row 7-17 :palette number input line
-Assign a palette number from 0 to 15 to each part
of panel.
-Duplication is allowed.
-Color actualy displayed by the palette-no is changed
by RGB color level specified in "Palette color" part.
-Screen part ID list.
Specify FG and BG for each part,FG is for color of
character,BG is for background color.
.Title-Line :title line(1st line,1st line of
active if screen split)
.Panel-Frame :other than else.
.Browse-Lineno :line-no field of browse screen.
.Browse-File :file contents field of browse screen
.Edit-Lineno :line-no field of edit screen.
.Edit-File :file contents field of edit screen
.DirList-Linecmd:line command input field of dir list
screen(It is also used for input
directive of this panell)
.DirList-Lineno :line-no field of dir list screen
.DirList-File :file list field of dir list screen
.CmdOut-Lineno :line-no field and command echo line of
command result edit screen
.CmdOut-Result :command output lines of cmd result
edit screen
col 20-21 :foreground color input field
col 25-26 :background color input field
#ifdef LNX
PaletteNo>=8 may not be used for background color.
#endif
col 29-33 :palette number when opened this panel.
col 36-40 :default value.
col 43- :sample display lines.
Chenge takes effect at first when Execute key is
entered after input palette number.
F3(End) propageta the change,F1(Cancel) reset
the change and restore the value before panel open
(it is diplayed on column 29-33).
row 19-24 :Palette color part.
#ifdef UNX
#ifdef LNX
row 21 :0-7:color is displayed on background.
:8-15:color is displayed on foreground.
#endif
#else
row 21 :color display line for all palette number( 0 to 15).
#endif
row 22 :Palette color RGB level input fields.
-3 digit(R(ed),G(reen),B(lue) from left) color level,
4 level(0 to 3) for each color.
Color register value for each level is
0:00H, 1:15H, 2:2aH, 3:3fH.
-RGB=000(Black) is fixed to palette number 0,
it is not allowed to input to palette number 0 and
to assign RGB=000 to palette number 1 to 15.
-Pressing execute key after input RGB level take effect
imediately not only to color display on row 21 but also
to all panel.
-"Next Value"(Shft + Down-arrow)/"Prev Value"(Shift +
Up-arrow) take same effect as increasing/decreasing RGB
level then pressing Excute key.
-F3(End) leave change,F1(Cancel) restore RGB value
before opened this panel(values on row 23).
row 23 :RGB level value at opened this panel.
row 24 :default RGB level.
#ifdef UNX
(note).Delete file xe_save_ on work directory if screen had become to
hard to see.It reset to default color.
gxe use xe_save_.xxe as save file.
#else
(note).Delete file XE!SAVE! on work directory if screen had become to
hard to see.It reset to default color.
#endif
Default color of each palette-no is as following.
palette color-no color : palette color-no color
0 0(000) black : 8 56(111) grey
1 1(002) blue : 9 57(113) pale blue
2 2(020) green : 10 58(131) pale green
3 3(022) light blue: 11 59(133) pale light blue
4 4(200) red : 12 60(311) pale red
5 5(202) purple : 13 61(313) pale purple
6 20(210) brown : 14 62(331) pale yellow
7 7(222) white : 15 63(333) brightend white
.Light blue is used by MKK(Japanese Front End Processor of PCDOS),
it is hard to see text if you use that as FG color.
.Palette color change is not effective under OS/2 window mode,
Setting color RGB level cause differrent color displaying
between full-screen-mode and window-mode.
Palette color change is not available for also WIN version.
.RGB level of each color register number is as following.
(4 level for each RGB. 0:00H, 1:15H, 2:2aH, 3:3fH)
color-no RGB level
00-03: 000(black) 002(blue) 020(green) 022(l-blue)
04-07: 200(red) 202(purple) 220(yellow) 222(white)
08-11: 001(d-blue) 003(b-blue) 021 023(greenblue)
12-15: 201 203 221 223
16-19: 010(d-green) 012 030(b-green) 032(sky blue)
20-23: 210(brown) 212 230 232
24-27: 011(d-l-blue) 013 031(bluegreen) 033(b-l-blue)
28-31: 211 213 231 233
32-35: 100(d-red) 102 120(yellowgreen)122
36-39: 300(b-red) 302(d-pink) 320(gold) 322
40-43: 101(d-purple) 103(violet) 121 123
44-47: 301(purplered)303(b-purple)321 323
48-51: 110(d-yellow) 112 130 132
52-55: 310 312 330(b-yellow) 332
56-59: 111(grey) 113(p-blue) 131(p-green) 133(p-l-blue)
60-63: 311(p-red) 313(p-purple)331(p-yellow) 333(b-white)
p-:pale, d-:dark, l-:light, b-:brightened