************************************************************************
(7).Command line parameter.
************************************************************************
#ifdef UNX
.format:
xe [ edit-file-name | "*" ] [-option -...]
edit-file-name:gotoEdit screen when specified
"*" means the file/dir last closed on previous session.
( '"' is required to avoid shell translation.)
(note). If 0,1,2 or 6 is specified as edit-file-name,
it is treated as input to MENU panel.
To edit these file-name,use -B or -E option or
once enter to xe without edit-file-name
then enter "E 0" etc.
option :case insensitive,no sequence,
last effective if dup
.option
-b :Browse mode open
-e :Edit mode open(default)
Use when edit file name is "0","1","2" or "6"
(same as menu option id).
-Fx[t][:hosts]:x=0:FTP is not used, x=1:FTP avail(without log)
x=w:output ftplog, x=a:ftplog by append mode.
:t:debug option not to delete temp file for ftp get.
:hosts:hosts filename for xe.
Default is /F1:xehosts(xehosts on work directory)
-h,-? :Help
-hnn :Screen hight.
Use when screen hight and screen buffer size is not
same on TeraTerm ini file specification.
-i[fname] :ini filename to be used.if not use,specify simply -I
:to use default values.
:default is xe.ini if missing this option
-Ln :jump to the line nn just after the file is opened.
-r :Set current directory.
It is set from CD command on previous session.
Default drive is of at CD.
-tn :TAB column span,default n=4
-wxxxx :Work dir name.override export xe=xxxx.
-y:x and -n:x:Toggle Set(-y) and Reset(-n) option
:(default is in parethesys)
x=a (-na):ASCII only(-ya) or Accept Ctrl char(-na)
Valid_Ctrl_char option on INI file is ignored
when -ya is specified.
x=c (-yc):add change-id-tag to modified lines
x=d (-yd):dump when internal error detected
x=t (-nt):Tab display or not
-/ :End of parameter(ignore following)
Use to cut re-displayed command by history func.
Other is trated as EDIt/BROwse command parameter.
.Sample
xe config.sys -t8 -yrt -nc
(note)
Options change by exe line parameter is effective only in current
session.
It is not written to option save file(xe_save_).
#else
.format:
xe [ edit-file-name | * ] [/option /...]
edit-file-name:goto Edit screen when specified
* means the file/dir last closed on previous session.
(note). If 0,1,2 or 6 is specified as edit-file-name,
it is treated as input to MENU panel.
To edit these file-name,use /B or /E option or
once enter to xe without edit-file-name
then enter "E 0" etc.
option :case insensitive,no sequence,
last effective if dup
.option
/B :Browse mode open
/Dx[t] :memory alloc trace+debug trace
x :0:no memory trace(default),1:statistic,2:to xe___.mtr
t :0:no debug trace(default),1:write to xe___.trc
___ is dos , os2 , gcc or win.
/E :Edit mode open(default)
Use when edit file name is "0","1","2" or "6"
(same as menu option id).
-Fx[t][:hosts]:x=0:FTP is not used, x=1:FTP avail(without log)
x=w:output ftplog, x=a:ftplog by append mode.
:t:debug option not to delete temp file for ftp get.
:hosts:hosts filename for xe.
Default is /F1:xehosts(xehosts on work directory)
/H,/? :Help
#if defined(W32)
/Hnn :Screen hight. max is screen buff size.
Use when screen hight and screen buffer size is not
same on DOS prompt under Windows 2000.
#endif
/I[fname] :ini filename to be used.if not use,specify simply /I
:to use default values.
:default is xe.ini if missing this option
/Ln :jump to the line nn just after the file is opened.
this is for VC++ debugger to open by xe the file in question.
to use this function,setup VC++ as following.
register xe as tool.(Tool-->Customize-->Tool tab)
set argument like as "$(FilePath) /L$(CurLine)"
and also current dir as "$(CurDir)"
shortcut key is registered by Keyboard tab selecting
UserTool_ of Category:Tool.
/R :Set default drive,current directory.
It is set from CD,d: command on previous session.
Default drive is of at CD.
/Tn :TAB column span,default n=4
/Wxxxx :Work dir name(alternative of SET xe=xxxx)
c:\xe_wd except UNIX when no env var nor /W specified.
/Y:x and /N:x:Toggle Set(/Y) and Reset(/N) option
:(default is in parethesys)
x=a (/Na):ASCII only(/Ya) or Accept Ctrl char(/Na)
Valid_Ctrl_char option on INI file is ignored
when /Ya is specified.
x=c (/Yc):add change-id-tag to modified lines
x=d (/Yd):dump when internal error detected
x=l (/Yl):LFN usage.(GCC version only)
x=n (/Nn):No DBCS input process(WIN version only)
x=r (/Nr):Use Right-Ctrl key as Execute key
x=t (/Nt):Tab display or not
// :End of parameter(ignore following)
Use to cut re-displayed command by DOSKEY etc.
Other is trated as EDIt/BROwse command parameter.
.Sample
xe config.sys /T8 /Yrt /Nc
(note)
Options change by exe line parameter is effective only in current
session.
It is not written to option save file(XE!SAVE!).
#endif