|
This (rather long) page is devoted to illustrating the various FDISK screens.
FAT16/FAT32
If your version of Win95 supports FAT32, and if your hard disk is 512 MB or more, the first screen that appears asks:
Your computer has a disk larger than 512 MB. This version of Windows includes
improved support for large disks, resulting in more efficient use of disk
space on large drives, and allowing disks over 2 GB to be formatted as a
single drive.
IMPORTANT: If you enable large disk support and create any new drives on this
disk, you will not be able to access the new drive(s) using other operating
systems, including some versions of Windows 95 and Windows NT, as well as
earlier versions of Windows and MS-DOS. In addition, disk utilities that were
not designed explicitly for the FAT32 file system will not be able to work
with this disk. If you need to access this disk with other operating systems
or older disk utilities, do not enable large drive support.
Do you wish to enable large disk support (Y/N)...........? [N]
|
This is your only opportunity to create a FAT32 system using the standard
Win95 utilities. The relative merits of FAT32 versus FAT16 are discussed in detail
by others and I'll not reiterate here. It will suffice to say that: - FAT32
makes more efficient use of disk space with partitions of 512 MB and greater.
- As stated in the warning above, disk utilities not designed explicitly for
the FAT32 file system will not work with this disk.
- Files in FAT32 format will not be accessible to previous MSDos
versions.
- DriveSpace does not work with FAT32.
When FDISK is run (without any switches), the following screen is displayed:
Microsoft Windows 95
Fixed Disk Setup Program
(C)Copyright Microsoft Corp. 1983 - 1995
FDISK Options
Current fixed disk drive: 1
Choose one of the following:
1. Create DOS partition or Logical DOS Drive
2. Set active partition
3. Delete partition or Logical DOS Drive
4. Display partition information
5. Change current fixed disk drive
Enter choice (1)
Press Esc to exit FDISK |
- Create DOS partition or Logical DOS Drive
- Set active partition
- Delete partition or Logical DOS Drive
- Display partition information
- Change current fixed disk drive (Option available only if the machine has more than one hard drive)
FDISK requires that Disk 1 contains one Primary Partition and this must be
the first partition created. Disk 1 may also contain one Extended Partition.
Other disks may contain Primary and/or Extended Partitions. An Extended
Partition may contain one or more Logical Dos Drives. FORMAT will not
recognize an Extended Partition until Logical DOS Drives have been
specified within it.
Create DOS Partition or Logical DOS Drive
Current fixed disk drive: 1
Choose one of the following:
1. Create Primary DOS Partition
2. Create Extended DOS Partition
3. Create Logical DOS Drive(s) in the Extended DOS Partition
Enter choice (1)
Press Esc to return to FDISK Options |
- Create Primary DOS Partition
- Create Extended DOS Partition
- Create Logical DOS Drive(s) in the Extended DOS Partition
Press Esc to return to FDISK Options (Returns you to the main FDISK Options screen)
Create Primary DOS Partition
Current fixed disk drive: 1
Do you wish to use the maximum available size for a Primary DOS Partition
and make the partition active (Y/N) ........................[Y]
Press Esc to continue
|
... make the partition active (Y/N)
Press Esc to continue (Returns you to the main FDISK Options screen)
If you press [Enter] at this point, FDISK simply creates a single primary active partition the full size of the disk.
On the other hand, if you press [N], you will be presented with something like this:
Create Primary DOS Partition
Current fixed disk drive: 1
Total disk space is 1610 Mbytes (1 Mbyte = 1048576 bytes)
Maximum space available for partition is 1610 Mbytes (100%)
Enter partition size in Mbytes or percent of disk space (%) to
create Primary DOS Partition ..................................: [1610]
No partitions defined
Press Esc to return to FDISK Options
|
Press Esc to return to FDISK Options (Returns you to the main FDISK Options screen)
To create a partition of 600 MB (for example), enter "600" (or "37%") at the prompt. The next screen will show:
Create Primary DOS Partition
Current fixed disk drive: 1
Partition Status Type Volume Label Mbytes System Usage
C: 1 PRI DOS 600 UNKNOWN 37%
Primary DOS Partition created
Press Esc to continue
|
Press Esc to continue (Returns you to the main FDISK Options screen)
Pressing ESC takes you to the main FDISK Options screen which now contains the warning:
WARNING! No partitions are set active - disk1 is not startable unless
a partition is set active |
Note: The "System" is "UNKNOWN" until the Partition/Drive is
formatted, after which it will be listed as "FAT16" (or, presumably,
"FAT32" if using the OEM release of Win95).
Create Extended DOS Partition
Current fixed disk drive: 1
Partition Status Type Volume Label Mbytes System Usage
C: 1 PRI DOS 600 UNKNOWN 37%
Total disk space is 1610 Mbytes (1 Mbyte = 1048576 bytes)
Maximum space available for partition is 1010 Mbytes ( 63%)
Enter partition size in Mbytes or percent of disk space (%) to
create an Extended DOS Partition .............................: [1010]
Press Esc to return to FDISK Options
|
...create an Extended DOS Partition .............................: [1010]
Press Esc to return to FDISK Options (Returns you to the main FDISK Options screen)
Accepting the default (in this case 1010 Mb) leads to:
Create Extended DOS Partition
Current fixed disk drive: 1
Partition Status Type Volume Label Mbytes System Usage
C: 1 PRI DOS 600 UNKNOWN 37%
2 EXT DOS 1010 UNKNOWN 63%
Extended DOS Partition created
Press Esc to continue
|
Pressing Esc takes you straight to Creating Partitions - section 3 (Creating Logical Drives)
Note: Entering any figure other than the default will lead to unused
or wasted space (unless some other operating system can use it) because
FDISK only allows one primary and/or one extended partition
on a disk. If less than 100% of total disk space is allocated to the primary
and extended partition, then that's it as far as DOS is concerned.
If the Extended Partition is empty, the following screen is displayed:
Create Logical DOS Drive(s) in the Extended DOS Partition
No logical drives defined
Total Extended DOS Partition size is 1010 Mbytes (1 Mbyte = 1048576 bytes)
Maximum space available for logical drive is 1010 Mbytes (100%)
Enter logical drive size in Mbytes or percent of disk space (%)...[1010]
Press Esc to return to FDISK Options |
Press Esc to return to FDISK Options (Returns you to the main FDISK Options screen)
Accepting the default results in a single logical drive occupying all the space available in the Extended Partition. On the other hand, entering "262" (for example) results in:
Create Logical DOS Drive(s) in the Extended DOS Partition
Drv Volume Label Mbytes System Usage
D: 260 UNKNOWN 26%
Total Extended DOS Partition size is 1010 Mbytes (1 Mbyte = 1048576 bytes)
Maximum space available for logical drive is 748 Mbytes ( 74%)
Enter logical drive size in Mbytes or percent of disk space (%)... [748]
Logical DOS Drive created, drive letters changed or added
Press Esc to return to FDISK Options |
Press Esc to return to FDISK Options (Returns you to the main FDISK Options screen)
When all the Extended Partition has been assigned to Logical DOS Drives, a screen such as below is displayed:
Create Logical DOS Drive(s) in the Extended DOS Partition
Drv Volume Label Mbytes System Usage
D: 260 UNKNOWN 26%
E: 250 UNKNOWN 25%
F: 250 UNKNOWN 25%
G: 250 UNKNOWN 25%
All available space in the Extended DOS Partition
is assigned to logical drives
Press Esc to continue |
Pressing ESC returns you to the main FDISK Options menu (with the warning
that no partition has been set active).
Although a partition is usually designated active while partitioning a hard disk for the first time, this is not essential and an active partition can be set up or changed at any time.
Set Active Partition
Current fixed disk drive: 1
Partition Status Type Volume Label Mbytes System Usage
C: 1 PRI DOS 600 UNKNOWN 37%
2 EXT DOS 1010 UNKNOWN 63%
Total disk space is 2012 Mbytes
Enter the number of the partition you want to make active...........: [ ]
Press Esc to return to FDISK Options
|
Press Esc to return to FDISK Options (Returns you to the main FDISK Options screen)
Although no default is presented, there is only one option: 1. Entering this gives:
Set Active Partition
Current fixed disk drive: 1
Partition Status Type Volume Label Mbytes System Usage
C: 1 A PRI DOS PROGRAMS 500 FAT16 25%
2 EXT DOS 1514 75%
Total disk space is 2012 Mbytes (1 Mbyte = 1048576 bytes)
Partition 1 made active
Press Esc to continue
|
Press Esc to continue
Trying to make a partition active on another drive causes an error message:
Set Active Partition
Current fixed disk drive: 2
Only partitions on Drive 1 can be made active.
Press Esc to continue
|
Press Esc to continue
Note: If FDISK is being run from a DOS box in Windows, my experiments indicate that sometimes a partition can be deleted and sometimes it can't. At this stage I would say FDISK's behaviour in this situation is erratic. If you really want to delete a partition, first prepare an emergency startup floppy disk; then boot the computer and run FDISK from this. If you are merely experimenting, don't assume FDISK won't remove the partition from which it was loaded - it probably won't but you could find yourself in a bit of a mess!
Delete DOS Partition or Logical DOS Drive
Current fixed disk drive: 1
Choose one of the following:
1. Delete Primary DOS Partition
2. Delete Extended DOS Partition
3. Delete Logical DOS Drive(s) in the Extended DOS Partition
4. Delete Non-DOS Partition
Enter choice: [ ]
Press Esc to return to FDISK Options |
1. Delete Primary DOS Partition
2. Delete Extended DOS Partition
3. Delete Logical DOS Drive(s) in the Extended DOS Partition
4. Delete Non-DOS Partition
Press Esc to return to FDISK Options (Returns you to the main FDISK Options screen)
Note: A Primary Partition cannot be deleted until any Extended Partition has been deleted.
Delete Primary DOS Partition
Current fixed disk drive: 1
Partition Status Type Volume Label Mbytes System Usage
C: 1 A PRI DOS PROGRAMS 500 FAT16 25%
Total disk space is 2012 Mbytes (1 Mbyte = 1048576 bytes)
WARNING! Data in the deleted Primary DOS Partition will be lost.
What primary partition do you want to delete..? [1]
Press Esc to return to FDISK Options |
Press Esc to return to FDISK Options
As there is only one primary partition permitted on a drive, this would seem to be something of a trick question probably designed to slow you down more than anything else. If an Extended Partition is still present, the same question is asked but any answer results in an error message explaining that the Extended Partition must be deleted before the Primary one.
An Extended Partition cannot be deleted until all Logical Drives within it have been deleted (see option 3).
Delete Extended DOS Partition
Current fixed disk drive: 1
Partition Status Type Volume Label Mbytes System Usage
C: 1 A PRI DOS PROGRAMS 500 FAT16 25%
2 EXT DOS 1514 75%
Total disk space is 2012 Mbytes (1 Mbyte = 1048576 bytes)
Cannot delete Extended DOS Partition while logical drives exist.
Press Esc to continue |
Press Esc to continue
Delete Logical DOS Drive(s) in the Extended DOS Partition
Drv Volume Label Mbytes System Usage
E: DATA 500 FAT16 33%
F: COREL 500 FAT16 33%
G: GRAPHICS 514 FAT16 34%
Total Extended DOS Partition size is 1514 Mbytes (1 MByte = 1048576 bytes)
WARNING! Data in a deleted Logical DOS Drive will be lost.
What drive do you want to delete...............................? [ ]
Press Esc to return to FDISK Options |
After entering the appropriate drive letter, a confirmation line will be displayed asking for the Volume Name. If there is no name displayed, press Enter. A final warning and request for confirmation will be displayed before the drive is actually deleted. Once the drive is gone, the above screen is redisplayed (without the line for the drive that has been deleted) with a note that
"Drive letters have been changed or deleted".
Press Esc to return to FDISK Options
Presumably this option lets one delete partitions created and formatted for other operating systems (such as Unix or OS/2). I have no experience with this.
There are two ways to view partition information using FDISK:
4a. Selecting option 4 from the opening menu:
Display Partition Information
Current fixed disk drive: 1
Partition Status Type Volume Label Mbytes System Usage
C: 1 A PRI DOS PROGRAMS 500 FAT16 25%
2 EXT DOS 1514 75%
Total disk space is 2012 Mbytes (1 Mbyte = 1048576 bytes)
The Extended DOS Partition contains Logical DOS Drives.
Do you want to display the logical drive information (Y/N)......?[Y]
Press Esc to return to FDISK Options |
The information presented is generally self-explanatory. The above example is for a 2Gb hard drive divided into a primary partition of 500Mb (which is active), and an extended partition of 1500Mb.
Entering "Y" to display logical drive information will display something like:
Display Logical DOS Drive Information
Drv Volume Label Mbytes System Usage
E: DATA 500 FAT16 33%
F: GRAPHICS 500 FAT16 33%
G: DOWNLOADS 514 FAT16 34%
Total Extended DOS Partition size is 1514 Mbytes (1 MByte = 1048576 bytes)
Press Esc to continue |
Press Esc to continue
4b. Starting FDISK with the /STATUS switch.
C:\> fdisk /status
Fixed Disk Drive Status
Disk Drv Mbytes Free Usage
1 2012 100%
C: 500
E: 500
F: 500
G: 514
2 204 2 99%
D: 202
(1 MByte = 1048576 bytes)
C:\>_ |
In short, the information displayed using FDISK /STATUS is not quite as comprehensive, but covers all drives on one screen.
If the machine contains more than one physical hard drive, these are numbered accordingly (starting at 1). When FDISK starts, it will, by default, be ready to work with hard drive #1. To work with a different drive, use option 5 in the main FDISK menu and enter the appropriate drive number.
Note: changing the "Current Fixed Disk Drive" does not have anything to do with making drives bootable, active, or anything else - it merely lets you work on the different drives with FDISK.
Change Current Fixed Disk Drive
Disk Drv Mbytes Free Usage
1 2012 100%
C: 500
E: 500
F: 500
G: 514
2 204 2 99%
D: 202
(1 MByte = 1048576 bytes)
Enter Fixed Disk Drive Number (1-2).......................[1]
Press Esc to return to FDISK Options |
Press Esc to return to FDISK Options
Depending on exactly where you are in FDISK, the program can be closed by pressing ESC one or more times which will return you to the DOS prompt. If any changes have been made, FDISK closes with the instruction:
You must restart your system for changes to take effect.
Shut down Windows before restarting.
A:\>_
|
| 