INTERSVR--Notes

Specifying the order of drives

Interlnk redirects drives in the order you specify. The first server drive
specified is redirected to the first available client drive, the second
server drive specified is redirected to the second available client drive,
and so forth.

Redirected devices

Interlnk does not redirect network drives, CD-ROM drives, or any other
device that uses a redirection interface.

Remote copy procedure

To copy Interlnk files from one computer to another by using the /RCOPY
switch, you must connect the 7-wire, null-modem serial cable to the
computers' serial ports.

Using a serial mouse with Microsoft Windows

If you are using a serial mouse with Microsoft Windows and you start the
Interlnk server while Windows is running, you need to specify either the
/LPT switch or a /COM switch that designates a COM port other than the one
the mouse is using. For example, if the serial mouse uses COM1 and you are
using a parallel connection, specify the /LPT switch to prevent Interlnk
from scanning all COM ports.

Using Interlnk in a task-switching or multitasking environment

If you start the Interlnk server in a task-switching or multitasking
environment, task switching and key combinations that switch you out of your
current task are disabled. To restore these functions, quit the server.

Limitations on using INTERSVR with other commands

The following commands do not work with the Interlnk server:

    CHKDSK         FORMAT

    DEFRAG         MIRROR

    DISKCOMP       SYS

    DISKCOPY       UNDELETE

    FDISK          UNFORMAT